P600 Series - 51mm (2")

Photron's P600 / P6 Multi Element (50mm or 2” Diameter) series is designed for direct use in AAS systems manufactured by Perkin Elmer such as PinAAcle 500, 900, AAnalyst 200, 400 100, 300, 600, 700 and 800.

Hollow cathode lamps produced by Photron are designed and manufactured to achieve all of the following fundamental requirements for a spectral line source.

  • Intense emission of resonance (ground state derived) lines.
  • Narrow line width, for maximum sensitivity and linearity.
  • Minimal spectral interference from continuum emission, present in the cathode.
  • Rapid warm up to produce stable long term light emission.
  • Noise free operation.
  • Long running life and a 5 year shelf life.
  • Cathode materials and geometry achieve a combination of spectral purity and a suitable sputtering rate. (A high sputtering rate will give high intensity at the expense of lamp life, sensitivity and linearity.)
P971C | Sodium/Potassium 51mm (2”) Hollow Cathode Lamp Coded
$314.00

P971C | Sodium/Potassium 51mm (2”) Hollow Cathode Lamp Coded

Photron

To suit PerkinElmer Atomic Absorption Spectroscopy Insturments Lamp Details Lamp Type Multi Element Elements Sodium/Potassium (Na/K) Diamet...

View full details
$314.00
P973C | Chromium/Cobalt/Copper/Iron/Manganese/Nickel 51mm (2”) Hollow Cathode Lamp Coded
$314.00

P973C | Chromium/Cobalt/Copper/Iron/Manganese/Nickel 51mm (2”) Hollow Cathode Lamp Coded

Photron

To suit PerkinElmer Atomic Absorption Spectroscopy Insturments Lamp Details Lamp Type Multi Element Elements Chromium/Cobalt/Copper/Iron/Mang...

View full details
$314.00
P970C | Calcium/Magnesium 51mm (2”) Hollow Cathode Lamp Coded
$314.00

P970C | Calcium/Magnesium 51mm (2”) Hollow Cathode Lamp Coded

Photron

To suit PerkinElmer Atomic Absorption Spectroscopy Insturments Lamp Details Lamp Type Multi Element Elements Calcium/Magnesium (Ca/Mg) Diam...

View full details
$314.00

You recently viewed

Clear recently viewed